-//-> The Citronic Cellular Suite :: NEC P3 Reprogramming <-\\- In this package you will find the reprogramming software imaginatively titled 'P3.EXE'. This text file shows a diagram of the programming cable. .+[You will need]+. 2 x 1N4148 Diodes 25-pin D-Plug Plug for P3's socket To get the plug for the phones 'up-the-bum' socket you will need to buy the car saver. Simply cut the cigaretter lighter end off the cable and keep the rest. From the cigarette lighter end find the wires that correspond to the correct pins on the P3 plug as per the diagram below and solder on to the relevant pins of the D-plug. Don't forget to solder the diodes on the right way round. I would recommend putting a decent case around the D-25 plug as they can undergo a good deal of stress with continuous use. 25 Pin D-plug LPT1 Plug on end of curly cord __________________ _________________________ Pin 25.--------------------black--------------------------------------| Pin 15.--------------------red-------------------------------------| | Pin 6.---|<> Pin 3.---|<1N4148---| || [] [] [] [] [] [] Pin 12.--------------|-----brown--------------------------------| NOTE Diode protocol: Kathode---|