DIAMONTEL MESA DT M14 NOTES: These are dual NAM units. The ESN prefix is 134 decimal, 86 hex. See file MITSTEST.TXT for test mode access. DiamondTel: 708-298-9223 NAM programing: 1. Press PWR key for one second to turn on phone. 2. Wait for wake up cycle to end and display to clear. 3. Within ten seconds press and hold the CLR key while entering 8 2 9 1 1 1 2 (reset code). 4. Release CLR. 5. The phone will display the first data entry. 6. Press the SEND key to store information and increment the step number. 7. Press CLR to correct any item. 8. At any time press END to complete programing and exit. PROGRAMING DATA: STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION 01 0 OR 1 duAL no 0=1 NAM, 1=2 NAMS 02 10 DIGITS no1 NAM 1 MIN (AREA CODE AND TEL#) 03 00000 - 32767 SID1 NAM 1 SYSTEM ID 04 0 OR 1 LU1 NAM 1 LOCAL USE MARK 05 0 OR 1 E1 NAM 1 MIN MARK 06 333 OR 334 IPCH1 NAM 1 INITIAL PAGING CHANNEL 07 2 DIGITS ACCOLC1 NAM 1 ACCESS OVERLOAD 08 00 TO 15 GIM1 NAM 1 GROUP ID (10 FOR USA) If you selected 0 in step one go to step 20. 09 10 DIGITS no2 NAM 2 MIN (AREA CODE & TEL#) 10 00000 - 32767 Sid2 NAM 2 SYSTEM ID 13 0 OR 1 LU2 NAM 2 LOCAL USE MARK 14 0 OR 1 E2 NAM 2 MIN MARK 15 0333 OR 0334 IPCH2 NAM 2 INITIAL PAGING CHANNEL 16 00 TO 15 ACCOLC2 NAM 2 ACCESS OVERLOAD CLASS 17 00 TO 15 GIM2 NAM 2 GROUP ID (10 IN USA) 20 4 DIGITS SECUrity SECURITY CODE 21 0 OR 1 DTX VOX MODE 22 0 OR 1 InHIbIt ROAM INHIBIT 23 0 OR 1 C DTMF CONTINUOUS DTMF 24 0 OR 1 dIS CU rESEt CUMULATIVE TIMER RESET 25 0 OR 1 dIS IGn SEnSE DISABLE IGNITION SENSE 26 0 OR 1 dIS Own tEL DISABLE OWN TEL# DISPLAY 27 0 OR 1 SId LO USER SYSTEM SELECT LOCKOUT 28 0 OR 1 DUAL HS DUAL HANDSETS NOTES: To install lock code: With phone out of programing mode press FCN, 7, NNNN LLL CLR (where NNNN is 4 digit security code and LLL is new lock code). Do NOT use 911 as the lock code.