7 #                                                                             .   @    @    @    @ 
  J :       r   x  @    n        *           	                                             
Scanning Cellular (5) Conference




Date: 06-01-94 (20:48)              Number: 5 of 15 (Refer# NONE)
  To: ALL
From: THE PRODUCER
Subj: ESN on Nokia
Read: (N/A)                         Status: PUBLIC MESSAGE
Conf: Cellular (5)               Read Type: GENERAL (A) (+) HAS REPLIES

Can someone please leave me the necessary info for reprogramming the ESN
on a Nokia 1000 handheld.. just picked it up today and need the info
quick.  Also anything you can find on Novatel too.  Y thank u!!!:)  I
REALLY NEED THIS QUIK.. So if you have it, upload it or leave me mail or
something..

(114 min left), End of Message Command?


Here's some info we had on the Nokia 1000
Not exactly sure if its what you need

                             Mercenary/IIRG
------------------------------------------------------------------------------
NOKIA 101/1000

NOTES:  These are dual NAM units.
        The ESN prefix is 142 decimal & 8E hex.
        Nokia: 813-536-5553

NAM PROGRAMING:

1.  Turn on power.

2.  Enter * 3 0 0 1 # S S S S S STO 0 0, where SSSSS is the security code,
(114 min left), (H)elp, More?

    default is 12345, the phone should display "STORE NOT DONE", if it
    displays "NOT ALLOWED" then the security code was incorrect and the
    phone can not be programed.

3.  This phone is unusual as all programing data is stored in three
    memory locations.


LOCATION 01:

This entry contains emergency numbers, language code and lock code in the
following format:

(emerg number 1) # (emerg number 2)... # (language code) * (lock code)

    For example:     911 # *911 # 0 * 1234
(114 min left), (H)elp, More?


The language codes are: 0 for English, 1 for French and 2 for Spanish.

Press and hold CLR until the display clears.
Enter the data in one long string then press STO 01 STO


LOCATION 02 (NAM 1) and 04 (NAM 2)

This entry contains the MIN (area code and tel#) and optionally a 16
character alpha name, in the following format:

(area code,tel number) ALPHA (up to 16 characters) ALPHA

Note that "0" enters a space when in alpha mode.

(114 min left), (H)elp, More?

Press and hold CLR until the display clears.
Enter the data in one long string then press STO 02 STO, or STO 04 STO.


LOCATION 03 (NAM 1) and 05 (NAM 2):

This entry contains system parameters in the following format:

(system id) * (access method, 0 or 1) * (local use mark, 0 or 1) *
(initial paging channel) * (access overload class) * (group ID)

    For example: 31*1*1*333*02*10

Note that leading zeros are not required for SIDH & IPCH.
Enter the data in one long string then press STO 03 STO, or STO 05 STO.

To verify any information press and hold CLR until the display clears,
press RCL followed by the memory location.

To exit programing mode turn off power, if "NAM ERROR" appears when
you power the phone back up an error was made in programing, reprogram
the phone.

(114 min left), (H)elp, More?

Here's another one I scrounged in the Archives on the TC1000

Mercenary/IIRG
------------------------------------------------------------------------------
NOKIA P30, TC1000

NOTES:  This is a single NAM unit.
        The ESN prefix is 165 decimal, A5 hex.
        NOKIA: 1-800-666-5553

1.  Turn power on.

2.  Enter * 1 7 * 1 0 0 3 * S S S S S *, where SSSSS is the security code,
    12345 is the factory default.  If the security code is unknown see notes
    following programing data.

(114 min left), (H)elp, More?

3.  The SEL key stores and increments each step.

4.  The phone will exit programing mode automatically after the last step, or
    you can press SEL END at any time.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

0        00000 - 32767       HO id          SYSTEM ID
1        0 OR 1              ACCESS         MIN MARK
2        0 OR 1              LOCAL          LOCAL USE MARK
3        10 DIGITS           Phone n        MIN (AREA CODE & TEL#)
4        2 DIGITS            CLASS          STATION CLASS MARK
5        333 OR 334          PAGE ch        INITIAL PAGING CHANNEL
6        2 DIGITS            O LOAd         ACCESS OVERLOAD CLASS
8        2 DIGITS            GrouP          GROUP ID (10 IN USA)
9        4 DIGITS            Loc CodE       LOCK CODE


LOCK: SEL LCK, UNLOCK: LOCK CODE

SYSTEM SELECT: SEL 1, THEN 1 UNTIL DESIRED OPTION IS SHOWN:

 S = PREF/NON PREF
 A = A ONLY
 b = B ONLY


If the security code us unknown you can try the following:

1.  Open the handset connector (black "D" plug) and solder a jumper
    between pins 1 and 14.

2.  Remove the handset ear-piece pad to expose a hex screw, remove this
    screw.

3.  Remove the two rubber plugs located either side of the microphone,
    remove the two screws.

4.  Carefully split the handset apart.

5.  Locate the white 28 pin connector that connects the two PCB's, just
    below this connector is a factory installed jumper.  Install a second
    jumper to the left of the factory installed one.

6.  Reasemble hanset and connector.

7.  Congratulations!  You now have a Mobira test handset.  This modification
    is transparent during normal operation.

PROGRAMING:

1.  Enter LOCAL MODE (test mode) by pressing 01# (you will hear static
    from the ear piece).

2.  Enter NAM program mode by pressing 48#.


(114 min left), (H)elp, More?

NOVATEL 8300, 8301

NOTES:  This is a single NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Novatel 1-800-527-2885

NAM PROGRAMING:

1.  Turn power on.

2.  Enter FUNCTION LOCK # 2 5 9 quickly.

3.  The volume up key increments the steps (does not store).

4.  The SEND key toggles single digit, A/B and SET/CLR options.

5.  The SEND key stores each step.

6.  Note that data for steps 13 through 16, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

7.  The END key completes and exits programing mode.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
04                           INIT REP       PRESS SEND TO INITIALIZE MEM
                                            LOCATIONS AND CALL TIMERS
05       00000 - 32767       SIDH           SYSTEM ID
06       333 OR 334          IPCH           INITIAL PAGING CHANNEL
07       2 DIGITS            GIM            GROUP ID (10 IN USA)

STEPS 08 THROUGH 10 ARE NOT ON ALL MODELS

08       333 ONLY            IDCCA          SYS A INITIAL PAGING CHANNEL
09       334 ONLY            IDCCB          SYS B INITIAL PAGING CHANNEL
10       1 ONLY              REG TBL        DATA SCAN TABLE SIZE

11       4 DIGITS            LOCK CODE 1    DISPLAY ONLY
12       4 DIGITS            LOCK CODE 2    DISPLAY ONLY
13       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
14       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
15       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
16       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
17       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
18       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
19       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
20       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM, CLR=ALLOW ROAM)
21       SET/CLR             OPTION EE      TOGGLE UNKNOWN (DEFAULT IS SET)
                                            (SET=ON, CLR=OFF)
22       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
23       SET/CLR             OPTION MFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
24       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
25       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
26       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
27       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
28       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
29       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
30       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)


CHANGING LOCK CODE:
Date: 06-02-94 (02:07)              Number: 10 of 15 (Refer# 6)
  To: THE PRODUCER
From: MERCENARY
Subj: Novatel 8300,8301
Read: NO                            Status: PUBLIC MESSAGE
Conf: Cellular (5)               Read Type: GENERAL (A) (+)


With phone out of programing mode press MENU and scroll with volume key
until display shows "old code, level 1", enter current lock code (step 11
above) phone will display "new code, LLLL".  Enter the new code and press SEND.

LOCK: F 1.  UNLOCK: Enter four digit code.

SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.


-> If you have any info on programming Novatelz..... Can you spew some??

NOVATEL 8305

NOTES:  This is a single NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Software revision 1 - 5 can only be programed three times before
        being returned to Novatel.  These phones will be upgraded for
        free.
        Novatel: 1-800-527-2885


NAM PROGRAMING:

1.  Turn power on.

(113 min left), (H)elp, More?

2.  Enter FUNCTION LOCK # 2 5 9 quickly.

3.  The volume up key increments the steps (does not store).

4.  The SEND key toggles single digit, A/B and SET/CLR options.

5.  The SEND key stores each step.

6.  Note that data for steps 13 through 16, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

7.  The END key completes and exits programing mode.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

Steps 01 and 02 are not on all models

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
04                           INIT REP       PRESS SEND TO INITIALIZE MEM
                                            LOCATIONS AND CALL TIMERS
05       00000 - 32767       SIDH           SYSTEM ID
06       333 OR 334          IPCH           INITIAL PAGING CHANNEL
07       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
08       2 DIGITS            GIM            GROUP ID
08       333 ONLY            IDCCA          SYS A INITIAL PAGING CHANNEL
09       334 ONLY            IDCCB          SYS B INITIAL PAGING CHANNEL
10       1 ONLY              REG TBL        DATA SCAN TABLE SIZE
11       4 DIGITS            LOCK CODE 1    DISPLAY ONLY
12       4 DIGITS            LOCK CODE 2    DISPLAY ONLY
13       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
14       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
15       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
16       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
17       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
18       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
19       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
20       SET/CLR             OPTION QRC     TOGGLE QUICK RECALL
                                            (SET=ON, CLR=OFF)
21       SET/CLR             OPTION QST     TOGGLE QUICK STORE
                                            (SET=ON, CLR=OFF)
22       SET /CLR            OPTION WUT     TOGGLE WAKE UP TONE
                                            (SET-ON, CLR=OFF)
23       SET/CLR             OPTION EE      TOGGLE UNKNOWN (NORMALLY SET)
24       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
25       SET/CLR             OPTION MFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
26       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
27       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
28       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
29       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
30       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
31       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
32       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)

CHANGING LOCK CODE:

With phone out of programing mode press MENU and scroll with volume key
until display shows "old code, level 1", enter current lock code (step 11
above) phone will display "new code, LLLL".  Enter the new code and press SEND.

LOCK: F 1.  UNLOCK: Enter four digit code.

SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.

(113 min left), (H)elp, More?

-> If you have any info on programming Novatelz..... Can you spew some??

NOVATEL 8305A

NOTES:  This is a single NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Novatel: 1-800-527-2885


NAM PROGRAMING:

1.  Turn power on.

2.  Enter FUNCTION LOCK # 2 5 9 quickly.

3.  The volume up key increments the steps (does not store).
(113 min left), (H)elp, More?


4.  The SEND key toggles single digit, A/B and SET/CLR options.

5.  The SEND key stores entered data.

6.  Note that data for steps 15 through 18, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

7.  The END key completes and exits programing mode.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

Steps 01 and 02 are not on all models

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03                           INIT REP       PRESS SEND TO INITIALIZE MEM
                                            LOCATIONS AND CALL TIMERS
04       00000 - 32767       SIDH           SYSTEM ID
05       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
06       4 DIGITS            LOCK CODE 1    DISPLAY ONLY
07       4 DIGITS            LOCK CODE 2    DISPLAY ONLY
08       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
09       333 OR 334          IPCH           INITIAL PAGING CHANNEL
10       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
11       2 DIGITS            GIM            GROUP ID
12       333 ONLY            IDCCA          SYS A INITIAL PAGING CHANNEL
13       334 ONLY            IDCCB          SYS B INITIAL PAGING CHANNEL
14       1 ONLY              REG TBL        DATA SCAN TABLE SIZE
15       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
16       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
17       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
18       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
19       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
20       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
21       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM CLR=ALLOW ROAM)
22       SET/CLR             OPTION SSD     TOGGLE UNKNOWN OPTION
23       SET/CLR             OPTION QRC     TOGGLE QUICK RECALL
                                            (SET=ON, CLR=OFF)
24       SET/CLR             OPTION QST     TOGGLE QUICK STORE
                                            (SET=ON, CLR=OFF)
25       SET /CLR            OPTION WUT     TOGGLE WAKE UP TONE
                                            (SET-ON, CLR=OFF)
26       SET/CLR             OPTION EE      TOGGLE UNKNOWN (NORMALLY SET)
27       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
28       SET/CLR             OPTION MFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
29       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
30       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
31       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
32       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
33       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
34       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
35       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF, IF ON THEN PHONE
                                            WILL DISPLAY CHANNEL & RSSI WHEN
                                            FCN 9 IS PRESSED)

CHANGING LOCK CODE:

With phone out of programing mode press MENU and scroll with volume key
until display shows "old code, level 1", enter current lock code (step 11
above) phone will display "new code, LLLL".  Enter the new code and press SEND.

LOCK: F 1.  UNLOCK: Enter four digit code.


SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.

(113 min left), (H)elp, More?

-> If you have any info on programming Novatelz..... Can you spew some??

NOVATEL 8320

NOTES:  This is a quad NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Software revision Kn00 varies slightly to Kn01.
        Novatel: 1-800-527-2885


NAM PROGRAMING:

1.  Turn power on.

2.  Enter FUNCTION LOCK.

3.  Use the volume key to scroll to FULL LOCK (Kn01 versions).

4.  Press SND.

5.  Press # 2 5 9 to enter programing mode.

6.  The SND key is used store new data and to toggle SET/CLR options.

7.  The volume up key increments the steps.

8.  Note that data for steps 16 through 19, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

9.  This unit is equipped with a "Tamper Protection" option, if the phone
    displays "PASSWORD" after step 04 below then a six digit code must be
    entered to change data.  It is strongly suggested that this option NOT
    be used.

10.  The END key completes and exits programing mode.


NAM DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       0 TO 4              NAM x SEL      SELECT NAM 1-4
                                            (ENTERING 0 AT THIS STAGE
                                            WILL STEP DIRECTLY TO ENTRY
                                            26 BELOW)
04       ENABLE/DISABLE      NAM x ENABLE   TOGGLE NAM ENABLED/DISABLED

(If "PASSWORD" appears see note 10 above)

05       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
06       00000 - 32767       SIDH           SYSTEM ID
07       TOGGLE              TP OFF OR END

You may press END at this stage to return to NAM select, step 03, then
press "0" to go directly to step 26 below.  Steps 09 through 25 are
set automatically.  Press volume down if you wish to review or change steps
09 through 25.  It is suggested that you do not press SND which will display
the following:

08       6 DIGITS            TP CODE        ENTER 6 DIGIT PASSWORD
                                            (PRESS SND TO STORE)
                             AGAIN          RE ENTER PASSWORD TO CONFIRM
09       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
10       0333 ONLY           IDCCA          SYS A INITIAL PAGING CHANNEL
11       0334 ONLY           IDCCB          SYS B INITIAL PAGING CHANNEL
12       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
13       2 DIGITS            GIM            GROUP ID
14       1 ONLY              REG TBL        DATA SCAN TABLE SIZE
15       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
16       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
17       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
18       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
19       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
20       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
21       SET/CLR             OPTION RFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
22       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
23       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
24       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM, CLR=ALLOW ROAM)
25       SET/CLR             OPTION SSD     TOGGLE SIGNAL STRENGTH DISP
                                            (SET=ON, CLR=OFF)

26       SND/VOL             INIT REP       PRESS SND TO INITIALIZE
                                            MEMORY LOCATIONS
27       4 DIGITS            LOCKCODE       LOCK CODE (Kn00 VERSION HAS
                                            LOCK 1 & LOCK 2)
28       SET/CLR             OPTION QRC     TOGGLE QUICK RECALL
                                            (SET=ON, CLR=OFF)
29       SET/CLR             OPTION QST     TOGGLE QUICK STORE
                                            (SET=ON, CLR=OFF)
30       SET /CLR            OPTION WUT     TOGGLE WAKE UP TONE
                                            (SET-ON, CLR=OFF)
31       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
32       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
33       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
34       SET/CLR             OPTION EE      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
35       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
36       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
37       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)

LOCK: F 1.  UNLOCK: Enter four digit code.

SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.


(113 min left), (H)elp, More?

-> If you have any info on programming Novatelz..... Can you spew some??

NOVATEL PTR800, 825

NOTES:  These are quad NAM handheld units
        The ESN prefix is 142 decimal & 8E hex.
        Novatel: 1-800-527-2885

NAM PROGRAMING:

1.  Turn power on.

2.  Initialize NAM MIN lock out counter by entering:
    FCN FCN * 6 4 6 2 2 5 7

3.  PTR 800 enter: FCN FCN * 6 2 6 7 7 6 *

4.  PTR 825 enter: FCN FCN * 6 9 7 2 0 1 *

5.  The # key stores each entry.

6.  The volume up key increments the step number.

7.  At any time press FCN end to complete and exit programing mode.

PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  SOFTWARE REVISION
02       1 TO 4              NAM            SELECT NAM 1 - 4
03       00000 - 32767       SIDH           SYSTEM ID
04       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
05       333                 IDCCA          "A" SYS INITIAL PAGING CHANNEL
06       334                 IDCCB          "B" SYS INITIAL PAGING CHANNEL
07       0333 OR 0334        IPCH           INITIAL PAGING CHANNEL
08       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
09       2 DIGITS            GIM            GROUP ID (10 IN USA)
10       3 DIGITS            LOCK A         FULL ACCESS LOCK CODE
11       3 DIGITS            LOCK B         RESTRICTED LOCK CODE
12       0 OR 1              LC             LOCAL USE MARK
13       0 OR 1              EX             EXTENDED ADDRESS MARK
14       0 OR 1              PS             PREFERRED SYSTEM
15       0 ONLY              NSC            NON STANDARD CONTROL
16       0 OR 1              EE             END TO END (DTMF) DIALING
17       0 OR 1              REP            REPERTORY (SPEED) DIALING
18       0 OR 1              HA             HORN ALERT
19       0 OR 1              HF             HANDS FREE
20       0 OR 1              IRI            ROAM INHIBIT
21       0 OR 1              F1             LOCK A ENABLE
22       0 OR 1              F2             LOCK B ENABLE
23       0 OR 1              F3             ON LINE DIAGNOSTICS (FCN 4
                                            WILL DISPLAY CHANNEL & RSSI)
24       0 ONLY              F4             NOT USED
25       0 ONLY              F5             NOT USED
26       0 ONLY              F6             NOT USED
27       0 ONLY              F7             NOT USED

LOCK: F #.  UNLOCK: Enter three digit code.

SYSTEM SELECT: F 5 then one of the following: 1 = Pref/non pref, 2 = Non
pref/pref, 3 = A only, 4 = B only, 5 = Home only.

(112 min left), (H)elp, More?

-> If you have any info on programming Novatelz..... Can you spew some??

NOVATEL 8325

NOTES:  This is a quad NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Novatel: 1-800-527-2885


NAM PROGRAMING:

1.  Turn power on.

2.  Press FCN 1 or FCN LOCK.

3.  Use the volume key to scroll to FULL LOCK.

4.  Press SND.

5.  Press 2 5 5 # 5 1 0 * or 2 6 6 # 5 1 0 * to enter programing mode.

6.  The SND key is used to store entered data and to toggle options.

7.  The volume up key increments the steps.

8.  Note that data for steps 16 through 19, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

9.  This unit is equipped with a "Tamper Protection" option, if the phone
    displays "PASSWORD" after step 04 below then a six digit code must be
    entered to change data.  It is strongly suggested that this option NOT
    be used.

10.  The END key completes and exits programing mode.


NAM DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       0 TO 4              NAM x SEL      SELECT NAM 1-4
                                            (ENTERING 0 AT THIS STAGE
                                            WILL STEP DIRECTLY TO ENTRY
                                            26 BELOW)
04       ENABLE/DISABLE      NAM x ENABLE   TOGGLE NAM ENABLED/DISABLED

(If "PASSWORD" appears see note 10 above)

05       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
06       00000 - 32767       SIDH           SYSTEM ID
07       TOGGLE              TP OFF OR END  (NOT ALL UNITS)

You may press END at this stage to return to NAM select, step 03, then
press "0" to go directly to step 26 below.  Steps 09 through 25 are
set automatically.  Press volume down if you wish to review or change steps
09 through 25.  It is suggested that you do not press SND which will display
the following:

08       6 DIGITS            TP CODE        ENTER 6 DIGIT PASSWORD
                                            (PRESS SND TO STORE)
                             AGAIN          RE ENTER PASSWORD TO CONFIRM
09       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
10       0333 ONLY           IDCCA          SYS A INITIAL PAGING CHANNEL
11       0334 ONLY           IDCCB          SYS B INITIAL PAGING CHANNEL
12       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
13       2 DIGITS            GIM            GROUP ID
14       1 ONLY              REG TBL        DATA SCAN TABLE SIZE
15       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
16       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
17       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
18       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
19       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
20       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
21       SET/CLR             OPTION MFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
22       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
23       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
24       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM, CLR=ALLOW ROAM)
25       SET/CLR             OPTION SSD     TOGGLE SIGNAL STRENGTH DISP
                                            (SET=ON, CLR=OFF)
26       SND/VOL             INIT REP       PRESS SND TO INITIALIZE
                                            MEMORY LOCATIONS
27       4 DIGITS            LOCKCODE       LOCK CODE (Kn00 VERSION HAS
                                            LOCK 1 & LOCK 2)
28       SET/CLR             OPTION QRC     TOGGLE QUICK RECALL
                                            (SET=ON, CLR=OFF)
29       SET/CLR             OPTION QST     TOGGLE QUICK STORE
                                            (SET=ON, CLR=OFF)
30       SET /CLR            OPTION WUT     TOGGLE WAKE UP TONE
                                            (SET-ON, CLR=OFF)
31       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
32       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
33       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
34       SET/CLR             OPTION EE      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
35       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
36       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
37       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)

LOCK: F 1 (or LOCK key).  UNLOCK: Enter four digit code.

u k	8&$K
K
7K''
*
K

!KK*
K/KC K
K
 

$KKBKK% .>
CC$K	87K%
Y%K
K$%&@TRNL$D/"A</ PALV
 :`)g8LJVW,`2	?L<yf/e3`W*d
 1*~ u*d
*~w 	N`       ğ                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       
 @            "  #  $  %  &  h  r            e      9  E  F  n  o  p          <  K  L  n                +  I  J          >  T  U  V  c  d          	  4  R  S  T              &  '  l          	  	  	&  	'  	T  	  	  	  	  	  
  
  
F  
  
  
  
  
  ,  -  t        +  6  7           c  7  U  V          
  
  
(  
W  
u  
v  
  
  
  "  A  B  `  a          	  
      T  U        >  }      C  y  z  {                    B  C              >  Y  Z          I  J  n  o            =  V  W                  
  )  *  :  ;  N  O  x  y                     c      \                    R        ^          C  D          Q        D        >  y      8        Y          Z        !  !b  !  !  "  "S  "  "  #  #b  #  #  #  #  #  $	  $  $1  $l  $  $  $  $  %<  %  %  %  %  %  %  &   &F  &  &  &  &  &  &  &  '  '=  '  '  '  '  '  '  (  (
  (            c  (   (!  (?  (@  (i  (j  (  (  (  (  )  )
  )M  )  )  )  )  )  )  )  *  *  *+  *,  *j  *  *  +0  +v  +  +  ,1  ,f  ,  ,  -9  -r  -  -  .'  .e  .  .  /  /_  /  /  0  0Y  0  0  1  1T  1  1  2)  2g  2  2  3*  3h  3  3  42  4n  4  4  5#  5_  5  5  62  6p  6q  6  6  6  7  7h  7i  7  7  7  7  7  8"  8m  8n  8  8  8  8  8  8  9	  98  9X  9Y  9Z  9j           c  9j  9k  9~  9  9  9  9  :  :  :  :F  :G  :m  :n  :  :  :  ;  ;  ;  ;,  ;-  ;e  ;f  ;  ;  ;  ;  <H  <  <  =
  =F  =  =  =  >A  >  >  ?  ?J  ?  ?  @  @E  @  @  @  A?  Az  A  B  BE  B  B  C  C@  C  C  D  DU  D  D  E  EV  E  E  F  F^  F  F  G  GO  G  G  H  H^  H  H  I8  I9  IM  IN  I  I  J0  J1  J\  J]  J^  Jm  Jn  J  J  K6  K7  KU  KV  K  K           c  K  K  K  K  K  L6  LV  LW  LX  Lh  Li  L|  L}  L  L  L  L  L  L  M  M  MZ  M[  M  M  M  M  M  NH  N  N  N  N  O!  O"  O#  O-  O.  Of  Og  O  O  P  PZ  P  P  Q   Q!  QK  QL  Q  Q  Q  Q  R>  R  R  S  S*  S+  Sn  S  S  T<  Tw  T  U	  UK  U  U  U  V9  Vw  V  V  W1  W~  W  W  X;  X  X  Y  Y<  Y|  Y  Z  ZL  ZM  Z  Z  [  [S  [  [  \  \N  \  \  ]           c  ]  ]O  ]  ]  ^  ^O  ^  ^  _  _N  _  _  `!  `_  ``  `  `  `  `  `  a  ad  ae  af  a  a  a  a  a  a  b  b>  b^  b_  bo  bp  b  b  b  b  b  c  c  c-  c.  cO  cP  c  c  c  c  c  c  d  d  dB  d  d  d  eI  e  e  f  fZ  f  f  g  gZ  g  g  h  hd  h  h  i  iE  i  i  j  jD  jy  j  j  j  k  k  kZ  k  k  k  k  k  k  l  l  l%  lT  lt  lu  lv           c  lv  l  l  l  l  l  l  l  l  l  l  m@  mA  m  m  m  m  m  n)  n*  nt  n  o	  o  o  oM  oN  oO  oY  oZ  o  o  o  p  p@  p  p  q  qL  qM  qw  qx  q  q  r3  r4  r{  r  s  sX  sg  sh  s  s  t5  ty  t  t  uF  u  u  u  v;  vv  v  v  w0  wn  w  w  x:  xx  x  x  y>  yy  y  z  zK  z  z  {
  {R  {  {  |
  |L  |  |  }  }O  }  }  ~  ~O  ~  ~    N             c        ]      Ē                                                                                                                                                                                                                                                                                                                                                                                                                                                                                              
 V     
                       P            A     7    (   9j  K  ]  lv     B C D E F G H I J          	          ! "             &'()*+,-. r		V )* **2f    H H    @R(         , -^ &                   d                            A   =/  hB    B      H -:DW 3.1 (Serial) 
       VTTYFont               E K  V                                 