OKI 900



NOTES:  This unit has five NAM's.

        The ESN prefix is 129 decimal & 81 hex.

        OKI: 1-800-554-3112





NAM programing:



1.  Turn power on.



2.  Within 30 seconds press RCL & MENU keys together and release, enter

    * 1 2 3 4 5 6 7 8 #, (or enter dealer password if one has been used).



NOTE: If the dealer password is unknown and the factory default does not

      work use the following "back door" code:  * 6 2 7 2 9 8 5 4 #.



3.  The phone will then display the Software Version followed by the

    ESN in hex



NOTE: If you used the dealer password successfully in step 2 go straight

      to step 5 below.



4.  The phone will display "ENTER NEW PW AND STO" you may enter a ten digit

    password at this stage to be used in future re-programings.  Press

    STO to retain default password or enter a ten digit password and press STO.



5.  The phone will display "RE-ENTER PW AND STO" re-enter the password, press

    STO to confirm.  Again, press STO to retain default password.



6.  The following "re-set" options can be bypassed by pressing volume down

    to scroll.  Each step is followed two seconds later by "Press * to Clear",

    you can either press * or press CLR to bypass.



Step#    Display             Action



01       SSN#                Wait 2 seconds.

         Press * to Reset    Press * to clear social security (not used)

02       SPD MEM CLR         Wait 2 seconds.

         Press * to Reset    Press * to initialize speed dial memories.

03       DEFAULT DATA SET    Wait 2 seconds.

         Press * to Reset    Press * to initialize unit.

         POWER ON MESSAGE    Wait 2 seconds.

         Enter ALPHA         Enter up to 8 characters followed by STO,

                             or press CLR to bypass.





7.  The STO key stores each entry.



8.  The Volume UP key scrolls down through the steps.



9.  The Volume DOWN key scrolls UP through the steps.



10. At any time press CLR to exit program mode.  Phone will display

    "NAM x Program" press CLR to exit, or continue with additional NAMS.

    You may also go directly to any NAM by pressing Volume Down when phone

    displays "NAM x Program".  NAM's 2 through 5 only have steps 01 - 06

    below.



PROGRAMMING DATA:



STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION



01       10 DIGITS           Own#            MIN (AREA CODE & PHONE NUMBER)

02       5 DIGITS            System ID       SYSTEM ID

03       4 DIGITS            IPCH NO.        IPCH AUTOMATICALLY SET

04       2 DIGITS            ACCOLCC         ACCESS OVERLOAD

05       2 DIGITS            GIM             GROUP ID (10 FOR USA)

06       3 OR 4 DIGITS       Unlock          LOCK CODE

07       4 DIGITS            SCM             STATION CLASS MARK, USE 1000.

08       4 DIGITS/0 OR 1     OPTION          OPTION BITS:

                                             1 enables, from left to right:

                                             MIN Mark

                                             Hands Free

                                             Local Use

                                             NOT USED

9      6 DIGITS              SECURITY        SECURITY CODE (DEFAULT IS LAST

                                             SIX DIGITS OF ESN)





LOCK: Press MENU until phone displays "LOCK PRESS 0" then 0 to lock.



UNLOCK: Enter lock code.