The BEST Blowgun and darts. BY: /\/\akil, King of Darkness I'm sick of seeing stupid little files on how to make portable blowguns by using a McDonald's straw or something. And darts made out of straight pins and yarn. This is a file on how to make GOOD, Simple blowguns and Functional Long-Lasting Blowgun Darts. You'll need: 1. Two outer Casings of Bic Round Stic Pens (The Pen minus the ball point, Ink cylindar, and black cap at the back.) 2. A bunch of Packing tape (the real strong stuff) or Duck Tape. For the darts: 1. A bunch of BIG needles.. The kind that are this: ------------------ long or so. 2. An equal bunch of Q-Tip Cotton swab plastic stick things. Make sure they are the kind with the HOLLOW PLASTIC Tube. Not the Cheap Shit Cardboard stick kind. 3. Super Glue (Cyanoacrylate) and some kind of super glue accelerator: I used "Zip Kicker" or somethin'. You can do this without the accelerator.. But it's easier with it. O.K. First, Take a Bic round Stic Pen and rip the black little cap thing off the end and remove the ball point and ink thing. You should now be left with a round plastic tube. note.. You MUST use Bic Round Stick.. Not Bic Stic or the crystal breakable plastic pens. Now.. Take two of these pen-tubes and Tape them together TIGHTLY end-to-end. Use a lot of tape. YOU should now have 1 long AIRTIGHT tube. That's your blowgun. You could try taping three together to get a longer range.. But the differance is not much. Now that's a lot more sturdy and better blowgun than a flimsy McDonalds drinking straw!! Now the darts.. First Take your Q-Tips and rip the cotton off one end.. ONE END ONLY!! Now.. dip the other end (with the cotton on it) into that pile of super glue that you spilled all over your desk.. (my.. how clumsy you are). Now that the cotton end of the q-tip is covered in glue.. Let it soak in for a second or two, and then spray it with yer accelerator stuff. (Notice how it completely dries in about 1 second??) Now you should have something like this: /------Plastic Tube(hollow) Glue soaked cotton end----> (***)=============== Good.. Now file/sand down the hard cotton/glue end until it just BARELY will fall through the tube with no resistance. This way, your breath will propel the dart further. Next.. Take yer (big) needle and stick it about halfway in the open end of the plastic, hollow, Q-Tip and glue it in so it can NEVER come out.. (I mean a TIGHT fit!!!!) It should look like this now: (***)===============------ <--The Needle Good.. Now make some more of these. You're Finished!! I have been able to shoot these darts over 50 feet!! Try coating the tip with poison.. We Here at M.A.L.T. Prefer Dichlorovinyl Dimethyl Phosphate (DVDP) And remember.. Always put the dart in the side of the blowgun that you are blowing on. (Or the dart will go about 4 inches.) FUCK THE WORLD, ANARCHY RULES!!!!!!!!!!!!! This has been a M.A.L.T. Production All Rights worth Shit!! X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X Another file downloaded from: The NIRVANAnet(tm) Seven & the Temple of the Screaming Electron Taipan Enigma 510/935-5845 Burn This Flag Zardoz 408/363-9766 realitycheck Poindexter Fortran 510/527-1662 Lies Unlimited Mick Freen 801/278-2699 The New Dork Sublime Biffnix 415/864-DORK The Shrine Rif Raf 206/794-6674 Planet Mirth Simon Jester 510/786-6560 "Raw Data for Raw Nerves" X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X