Small Pipe Bombs typed and invented by 12/20/92 Fire and Brimstone SMPIPEBM.DOC & Lex Here's what you need. PVC pipe (a relativly small in diameter, and sort of thin.) 3-5 in. long HOW/WHERE .. hardware stores, off of construction sites, around the house, maybe Flash Powder/Gun Powder/Black Powder .. generally any base powder for this HOW/WHERE .. gun shops, make it yourself, out of model rocket engines, etc Hot glue gun & glue sticks .. a little less than on glue stick is used per bomb HOW/WHERE .. Hardware stores. You can buy glue sticks at your nieghborhood Walgreens. Fuse .. We have some nice waterproof fuse for this. HOW/WHERE We got this at a store called "SPY HEADQUARTERS".. you might be able to make it youself, with another doc. You can also mail-order from a fireworks supply house. Tell them you need it for your artwork, or something. Drill .. to make holes for the fuses .. Okay. Saw off a portion of your plastic pipe. Drill a hole in it so that the fuse can fit. Be sure to drill before your put in the powder. Put a piece of paper underneath the pipe, and squeeze about two cm.'s of glue into the bottom. Now dip this into some water, to cool it off faster. When it's cool enough, pull off the paper, and pour your base powder into it. Insert the fuse in the pre-drilled hole. Pour another 2 cm. or so of glue over the top, sealing it off. If you have some waterproof fuse, pour some around it to seal it off very nicely. If you had the waterproof fuse, then dip the whole thing into the water to cool it down. Drape some of the hot glue on the top caps you made and down around the tube body. This will strenghthen it more. If you have enought glue, then cover the whole goddamned thing in it. Light, run, and watch. They're really great, we've done these, and they work! (Watch out for flying pieces of PVC pipe, by the way. If you put one side with less glue, you can also make a rocket. Make a launcher out of a bigger piece of steel pipe, and there ya go!)