From the phile libraries of the Dark Angel ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Standard disclaimer : I am in no way responsible for the use or misuse of the information in this file. This file is presented for informational purposes only. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ (c) Copyright PyroTech Inc. February 1991 All information in this file may not be changed or deleted. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Welcome back to Pyro-Tech magizine hope you all enjoyed the last issue,I would like for some of you out there to send in some ideas though,it's kinda hard to gather enough information to make one of these magizines every month,this issue probally won't be as long as the first one but I don't really know because I haven't started to type any of it yet,well enough with the intro shit,let's get this mutha' fuckin' file started­­­ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ====================================================================== The Spoke Gun ====================================================================== Intro : (Shut up,I don't care if you hate intros,I like to write them!) The spoke gun is a simple yet sorta powerful gun that you can use to bug your little brother or sister or use in school(At your own risk). Items needed: 1. A spoke - Avalible from your next door neighbors new bike 2. A couple of boxes of matches 3. A sheet of aluminum foil How to make: 1. Rip a spoke off of your neighbors bike and shape it like this -------------------=== / | \ / ----| The thingy that joins the / Spoke spoke to the wheel / 2. Take some matches and file off the tips,put the grounded up match tips and pack them into the little hole where the fastener of the spoke is. 3. Tear off a peice of foil and roll it into a little ball,and pack it into the end of the spoke. 4. Now to shoot your gun all you have to do is hold a match or lighter under the end of the spoke and bang! The foil shoots off a pretty decent distance. ====================================================================== Portable,Harmless,stupid Rockets ====================================================================== Another intro : All this is,is a thing to make to annoy your room- mate or people in school. Items needed: 1. Matches 2. Foil How to make 1. Cut one half square inch of foil and wrap it neatly and tightly around the end of a match. 2. Hold lighter under the end of match and it will shoot up about four or five feet. To make a launcher simply shape a paper clip sp it will stand up hold a match at the same time. ====================================================================== Unstable Explosive ====================================================================== Intro : This is a pretty decent sized explosion, but just remember to make sure that you don't throw it near anyone(Ha ha)! 1. Mix solid nitric iodine with household ammonia. 2. Wait overnight 3. Pour off liguid 4. Dry mud on bottom till hard (Like concrete) 5. Throw something at it!!!! ====================================================================== Medium Explosive ====================================================================== Intro : This is a nice little explosive if you let it harden you can throw it and it will explode 1. Mix 7 parts potassim chlorate to 1 part petroleum jelly. 2. To ignite use an electric charge or a long fuze. ====================================================================== Car Bomb ====================================================================== Intro : All I have to say is be carful when using this one 1. Put liquid drano into a pillbox (The kind you get when you're on a prescription) 2. Close the lid and put it into someone's gas tank,make sure the car isn't running though. ====================================================================== Smoke Bomb ====================================================================== Intro : This is a smoke bomb,I don't know if it works or not but they say four pounds of this stuff will fill a block If it does tell me. 1. Mix 3 parts sugar to 6 parts epson salts 2. Put in a can, and heat it over a low flame untill it melts 3. Let it get hard(Show some playboys to do this) 4. Stick in a match for a fuse before it gets too hard 5. Stick it in a public bathroom and light it. ====================================================================== Car Smoke Screens ====================================================================== Intro : Another fun topic other then destroying cars is protecting them and their contents from pursuers. A diagram would fit only a few of the vehicles but this explantation should be under-stood by anybody at all handy with cars and trucks. First a hole is drilled in the exhaust manifold the size of the nozzle of a paint or plant sprayer. When the nozzle is welded in place a length of gas line is affixed to the nozzlw tube and feed into the driver's compartment. The gas line is then attached to the spary unit inside the driver's compartment under the dash. To use, the container is filled with castor oil, bought at any local grug store. Burned castor oil will blot out everything on the road behind you. A friend (of the author) tried this and just put in a few short squirts to see what it would do. The effect from his exhaust pipe was so wild it looked like a bomb had been dropped on the freeway. He was so startled he allowed himself to be pulled over by a cop and he almost got locked up for it. He could have gotten away if he had made a smokey run for it. It is the hot exhaust manifold which turns the castor oil into smoke. Smoke screens in war are made using this simple principle. Crank case oil to be thrown away is great for making smoke screens. It could also highlight the udea of recycling in your area. On the road, the smoke not only causes pursuers to slow down in order to see, but it causes panic among the other motorists on the road. This makes the police stop the chase as the trafic hazards are greater then your capture would be to them. ====================================================================== Mailbox Systems ====================================================================== Mailbox systems are the link between information and the underworld. If you have ever called one, then you will know the advantages of having one,especially the ones that are open to whole underworld, rather than just a select few. There are two types of mailbox systems that are widely used. The first type we will talk about is the multiple mailbox systems, or commonly referred to as message systems. These systems have several mailboxes set up on one number. Usually, you can access other mailboxes from that number by pressing '*' or '#'. Sometimes you just enter themailbox number and you are connected. These are the safest systems to use to protect information from US Sprint and other long distance companies. Since US Sprint and other companies call the destination numbers, it is safer to have 800 mailbox systems, and most of the time, the multiple mailbox systems are on 800 numbers. The passcode on these systems can vary in length and can be accessed by several different methods, so it is impossible to explain exactly how to hack these systems. The other type is the single mailbox system. These are usually set up in a reserved prefix in an area code. (Ex: 713-684-6xxx) These systems are usually controlled by the same type of hardware/software. To access the area where you enter the passcode, just hit '0' for a second or so. The passcodes are four (4) digits long. The only way to hack these is manually. The best thing you could do is to find one that does not have a recording from a person, but just the digitized voice. If you hack one that someone already owns, they will report it and it will not last as long. Here is a list mailboxes or prefixes to help you get started ---------------------------------------------------------------------- Single Multiple Digits ------------ ------------ 213-281-8xxx 212-714-2770 3 213-285-8xxx 216-586-5000 4 213-515-2xxx 415-338-7000 Aspen Message System 3 214-733-5xxx 714-474-2033 Western Digital 214-855-6xxx 800-222-0651 Vincent and Elkins 4 214-978-2xxx 800-233-8488 3 215-949-2xxx 800-447-8477 Fairylink 7 xx2-450-8xxx 800-521-5344 3 313-768-1xxx 800-524-2133 RCA 4 405-557-8xxx 800-527-0027 TTE TeleMessager 6 602-230-4xxx 800-632-7777 Asynk 6 619-492-8xxx 800-645-7778 SoftCell Computers 4 713-684-6xxx 800-648-9675 Zoykon 4 800-847-0003 Communications World 3 ====================================================================== How To Tap Your Own Phone Line(s) ====================================================================== --This article was origanally written by the Time Lord-- Intro : Many of you, like me, would (and probably already have) like to find other means of recording/tapping phone lines in your own home. Maybe it's a VMB message that talks at 100 words/second or maybe just saving some telephone conversations that you'd like to save for future blackmail. Whatever the case, here is the simple (and so fucking obvious) solution... Materials needed: Here's what you'll need: 1. Telephone extension cord RCA-type extension cord (the type for stereos) 2. Knife (anything that will splice wires) Electric Tape (Almost any type of tape will do) 3. Stereo/Amplifier (Duh!) 4. The IQ of a small rock How to make: For those of you who have ever spliced wires together, skip this paragraph and read on to the advantages of your concotion. For the rest of you dumbshits, here's how to do it: First off, chop off about 2-3 feet (hell if its long, chop as much as you want!) from the telephone cord, making sure to keep the telephone prongy-thingy (the one you plug into he wall) on one end and four (or two depending) cut-off wires (inside the main cable) on the other.Do the same with the RCA extension cord, making sure to keep the RCA-adapter-thingy (the one ya plug into the stereo) on one end and two cut-off wires (inside the main cable, usually one bare metal and the other in another wire...) on the other. Next, "splice" the ends together by picking the two middle wires from the phone cord (the red and green wires, if that helps) and cutting the rubber around them with the knife so that bare wire is showing. Next take two of them (one from the rca and one from the phone cord) and wrap them around each other. Use the electric tape to cover up this connection (make sure no bare wire is "peeking" out). Then do the same with the other two. Then maybe wrap some more around the lot just for the hell of it. People with two lines If you have two lines the middle two on the phone cord (red and green) are line 1 and the two outer ones (black/blue and yellow) are line 2. So you can pick which line you want to hook up to. Results ------- Now you have one big-ass cord! Okay, now take the phone end and plug it into (guess where!) any open phone outlet (Don't worry it won't take your phone "off the hook" no matter how long you leave it plugged in). Take the RCA end and plug it intothe auxillary /cd/phono outlet in the back of your stereo. Turn on the stereo and you're ready to rock! The input level is pretty low so "pump up the volume!!!". It should only come out of one speaker, but you will able to not only record and listen to your own conversations, but anyone in the house using that phone line will also be picked up (Blackmail sisters, brothers, and parents!!!) Reasoning --------- The reason I wrote this was that a pretty good friend of mine took his whole fucking phone apart to do the same thing I just explained (and he can't record others conversations without there being a difference in sound, i.e. the person at your end sounds "far away") I wanted to save the rest of you dumbshits from yourselves! Disclaimer ---------- Why the fuck should I have one??? Like someone's gonna really track me down for writing a fucking g-file!!! Personal greets go to: Whizz, Spindizzy, and Elite... (c)1989 The S.H.I.T.!Call The Ripco BBS (312) 528-5020 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Well,that's about it for this issue,I hope you enjoyed it,I would like to send a special thanx out to everyone who contributed to this issue. And I would also like to add that I want LOTS of people to send in there files like this. Send all contributions to: Dark Angel 98 Richard Dr Poca Wv 25159 Please make sure all contributions are on 5¬ inch disks ====================================================================== Written by the Dark Angel of Pyro-Technologies--Home base of: Pyro-Tech Experimental,Pyro-Tech Manufacturing,Pyro-Tech Mailing base. ======================================================================